DO NOT RETURN TO RETAILER WHERE YOU PURCHASED AT.
CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or [email protected]
22
STEP 6 - "Stand R Swing
TM
" seat assembly (w. "Adjustable Height"
Feature)
Important: Please make sure to use the J1A with J3A-N (the plastic is Green
Color). This is CRITICAL to other assembly steps.
Connect Stand R Swing
TM
to the chains by inserting J3A through K2 and secure
with J7A, J9A and J6A as shown in Diagram A.
Connect Stand R Swing
TM
chains to the top bar by inserting J3A-N through A2 &
A3 and securing with J8A and J6A as shown in Diagram B.
If you wish to shorten the chain length, follow Diagram C.
Diagram A
NOTE:
1.
Do not over-tighten the nuts and bolts at every step.
2. Do not snap in the cover of plastic cap until you have finished the assembly of
each step and went back to tighten all of the nuts and bolts.
IMPORTANT: The METAL ‘washer’ (J7A) is needed
in the seat assembly.
K2
J3A
J3A
J1A
J1A
J6A
J6A
J9A
J9A
J7A
J7A
