IFU ACTIVESOL FLEX en 10 17 V.3.
WARNING
Modules connected in a parallel circuit must be identical, have the same voltage and intensity and derive
from a single manufacturer. It is necessary to comply with the current regulations regarding the required securities and
limits of the maximum number of modules connected in a parallel circuit.
ATTENTION!
Serial chains may be connected in a parallel circuit only if the series include the same number of
modules.
RECEIVER CONNECTION
A photovoltaic module may not provide direct supply to the power receiver. It is recommended to use a battery
including a charging controller. The photovoltaic module and battery must be connected to the charging controller.
MAINTENANCE
The ACTIVESOL LIGHT & ULTRA modules do not require special maintenance. The module must be cleaned on a
regular basis and verified periodically in terms of the mechanical and electrical connections. It is also necessary to
control the system’s performance by verifying the module’s electrical parameters on a regular basis.
MODULE CLEANING
Dirt on the module’s surface degrade its performance and may cause an analogous effect to the effect cause by the
module’s shading. The module must be cleaned with clean water, using a soft sponge or cloth.
WARRANTY
The ACTIVESOL LIGHT modules have a two-year material warranty. The ACTIVESOL ULTRA modules have a five-year
material warranty. The warranty embraces material and manufacturing flaws as well as repairs executed during the
warranty period. The warranty does not embrace, among others, damage caused by incorrect use, use which is non-
compliant with the intended use, non-compliance to the entries of the user manual and natural wear.
Detailed entries regarding the warranty conditions are available at www.activesol.pl.
MANUFACTURER
XDISC S.A.
82 Jagiellońska St., 03-301 Warsaw
, www.x-disc.pl
+48 22 811 21 43