xDEEP ZEOS 28+, User Manual

Page: 36 / 40

REPAIR AND MAINTENANCE
XDEEP BCDs does not contain any elements which can be
repaired by the user, and so all repairs (including lubrica-
tion or replacement of worn-out elements) should be
performed only by trained technicians holding certificates
issued by the producer (authorized service center).
For repair of XDEEP BCDs, only elements and spare parts
supplied by the producer must be used. Elements and
spare parts from other sources, although identical by
all appearances, may have slightly different properties,
which may negatively affect the working life of the BC.
The only maintenance procedure which may be per-
formed by the user is rinsing the BC in fresh water. It is
recommended after diving in salt or chlorinated water.
On no account should detergents, cleaning agents or sol-
vents be used for cleaning the BC. In case of heavy soil,
contact the producer for additional information.
The only maintenance that may and should be performed
by the user are washing the compensator in clean fresh
water, recommended after diving in salt or chlorinated
water, as well as disinfecting the equipment. In no event
should you use detergents, cleaning agents, or solvents
to clean the compensator. In case of persistent contami-
nation, contact the manufacturer for more information.
In order to disinfect the compensator, use only
disinfectants that do not interact with plastics and rubber.
We recommend using gigasept for this purpose. The only
acceptable method of disinfection that the user may apply
is rinsing the compensator in a disinfectant solution. You
should follow the instructions available for the use of the
disinfectant. If you are unsure whether or not the sub-
stance that you wish to use will damage the compensator,
contact the producer for more information.
WARNING
FOR SAFETY REASONS, THE BC SHOULD BE
OVERHAULED AFTER EVERY 200 DIVES, HOWEV-
ER NOT LESS FREQUENTLY THAN ONCE A YEAR.
SUCH OVERHAUL SHOULD BE PERFORMED BY AN
AUTHORISED XDEEP SERVICE CENTRE.
36