8 Mounting of the bungee cord 1/2
The characteristic feature of the side mount configuration are the bungee cords which route around the
cylinders valve and draw the cylinder tight into the divers body, creating a very clean and streamlined profile.
There are several different methods of mounting the bungee cord:
1.
One continuous length of bungee cord run behind the back (between the metal adaptor plate and
upper node),and connected to both the left and right shoulder D-rings with a bolt snap ;
2.
Two individual lengths of bungee cord attached to the upper node, and attached directly above the
left and right shoulder D-rings;
3.
Two individual lengths of bungee cord attached to the upper node, and attached to the left and right
shoulder straps by a “floating” loop.
Although the first method is very popular, it does have the disadvantage of trapping the D-rings against the
chest. This is why we suggest either of the other two methods.
The bungee cord is attached to the harness at the
adaptor plate on the upper node.
The mounting is achieved by passing the bungee cord
through the holes in the adaptor plate and fixing with
a knot. This allows for possible adjustment under
water by a partner.
If the single bungee cord configuration is desired, it
will need to be run between the metal adaptor plate
and upper node to avoid instability.
The pictures below show the two alternative methods of bungee configuration:
Fig.6. Bungee connected above the D-ring
Fig.7. Bungee connected with “floating” loop
Fig.5. Attachment of bungee cord to the upper node.
