16 |
P a g e
ADJUST THE THRESHOLD THAT IS DISPLAYED IN THE VOLTAGE FIELD
Refer to pg.13 for setting.
27.0
Example of voltage display of battery status. Color will vary depending on battery status.
SYSTEM MENU
SETTINGS
Indicates which connector the
MENUs
are
OUTPUT MENU’s to
HD/ SDI
output on. HD
/
SDI bnc..
Specifications:
Specifications may change without notice.
Case size:
2.8” x 3.5” x .875”, 71.1mm x 88.9mm x 22.1mm
Case material:
.063” Aluminum
Keypad:
5 pushbutton back lit, phosphorus infused silicone rubber
Weight:
5.7 ounces / 162.6g
Power:
10.0-33.0 Vdc input range
Power consumption:
4 watts
Circuit protection:
Reverse polarity protected
Operating & Storage Temperature
:
-25C to 65C
Input video signal types:
Digital Video:
See supported formats in Table below.
SMPTE 4:2:2, 10-bit 2K, 3G, and HD
SMPTE 4:2:2, 8-bit SDI
800mVpp,
75Ω internal termination
Warning
: Double 75Ω termination or improper signal splitting
may result in signal corruption or loss.
.
Output video signal types:
Same as above. All require proper 75Ω termination.
Input Connectors:
POWER IN
EHG/EGG-1B-308 8 pin.
Power inputs (see pin definitions below).
HD/SDI IN
BNC
SMPTE digital video input.
Output Connectors:
Optional
POWER OUT
EHG/EGG-1B-308 8 pin.
Note: 44 Watt maximum loop through on the 1B-308 connectors.
Maximum LCD/CRT monitor current load would be 3 amps at 14.4 volts
(44 watts) on the power wires through using a 24” long monitor cable
with a minimum 24 Awg copper wire.
HD/SDI out
BNC.
SMPTE digital video output with or without overlays, or HD 1080i
SMPTE Test Pattern output when there is no video input.
HD/SDI Loop
BNC.
SMPTE digital video output without overlays only when a digital video
input is present.
Note: The SMPTE Test Pattern is NOT available on this output.
HDMI
Micro HDMI (Type D).
Note: Currently not functional, future expansion
