XCS Excess15, User Manual

Page: 73 / 124

71
For the use and maintenance of the watermaker, please refer to its
instruction guide.
The boat may optionally be fitted with a watermaker located in front of
the berth in the aft port cabin.
OPERATION
The watermaker operates when the generator is powered up.
Open the sea water inlet valve (accessed via the floor in front of the
berth in the aft port cabin).
To switch the watermaker on:
- Check that the relevant automatic breaker located on the protection
panel in the cupboard to the left of the companionway in the starboard
float is set to “ON”.
- Switch the watermaker on using its switch on the side of the
watermaker.
The watermaker circuit has a 3-way valve used to supply the port or
starboard tank with fresh water. This valve is located in front of the
watermaker.
Check the level of fresh water in the tanks when the watermaker is
working.
The watermaker has an automatic rinse function at the end of the
cycle.
Make sure that the water unit is operating when using the watermaker.
WaTER SySTEmS 06
REcommENDaTIoN
The watermaker shall be used exclusively in clear waters.
06.6 Watermaker (optional)