16
TROUBLE SHOOTING
Problem
Possible Causes
What To Do
The display on the front panel does
not light up.
Main cable is not connected.
Check that the mail cable is plugged into power socket.
No sound or picture but the front
panel red light is ON.
The unit is in standby Mode.
Press the standby button.
No sound or picture
The satellite dish is not pointing
at the satellite.
Adjust the dish
Check the Signal Level in the antenna Setup menu.
No signal or weak signal
Check the cable connections LNB and other equipment
connected between the LNB and the receiver, and/or adjust the
dish.
Bad picture / Blocking error
The satellite dish is not pointing
at the satellite.
Adjust the dish.
Signal is too strong.
Connect a signal attenuator to the LNB input.
Satellite dish is too small.
Change to a larger dish.
LNB noise factor too high
Change to an LNB with lower noise factor.
The LNB is faulty.
Change the LNB.
No picture appears on the TV
screen.
TV is not in AV/EXT Mode.
Check the UhF channel fixed in your system and tune the UhF
channel properly.
The Remote control unit is not
working
Battery exhausted.
Check the battery.
Remote control unit is incorrectly
aimed.
Aim the Remote control unit at the unit, or check that nothing
blocks the front panel.
www.xcruiser.net
XDSR57FTA
