PREPARING THE X2 GEO FOR FLIGHT
CONNECTING THE RFD 900+ TELEMETRY
STEP 2:
Connect RFD 900+ Long Range Telemetry
(If not already installed you can download the QGroundControl program online at
www.
qgroundcontrol.com/downloads
). It is a free open-source program. As of the writing of this
manual version 3.1.3 is recommended.
q
Plug in RFD 900+ long range telemetry sensor into computer using the included
USB cable.
w
In QGroundControl Program:
i.
Click in upper left.
ii. Click
to connect to RFD 900+ long range telemetry.
iii. Click “add” at the bottom.
iv. Under serial link settings – select serial port for vehicle.
v. Set baud rate to 57600.
STEP 3:
Calibrate Vehicle.
See next page.
(Continue on next page to begin calibrating you x2 Geo)
11
