Operation instruction
Trial operation
First preparation
-
The flashing of the panel water temperature light and/or night light indicates
that the product is not connected to water. Please put down the bidet cover,
open the water supply valve, turn off the power, and then turn it on again.
Do not perform any operation during the reset. Use it after 3min
when the night light no longer flashes.
-
After finished connection of water supply, open the angle valve and switch
on the power. The nozzle will come out which is the self inspection process.
-
It is normal for the nozzle to delay spraying for 10-15 seconds for the first time.
Note:
Turn on the water source first, then turn on the power
PAGE 13
PAGE 12
When the body is seated and this button is pressed, the nozzle will protrude and
spray water towards the rear. Press again, and the nozzle will automatically move
back and forth like a massage, for a pleasant oscillating washing experience.
Pressing this button will start cleaning the front for women, lasting for 2
minutes. Press this button again during the cleaning process, and the spray
will move forward and backward for oscillating cleaning. Pressing the "Water
Adjust" during cleaning will adjust the water pressure. Press "Stop" at any time
to complete flushing.
Press to activate the 8-hour ECO mode, which will reduce energy
consumption. ECO mode will automatically turn off after 8 hours or when
sitting on the toilet. Press and hold the button to turn off the power of the
remote control.
When body stood up and press this button the light on/off.
When body seated and press this button activates the turbo wash with
intensive water pulsation to help defecation.
This function is designed for kids. Press this button,the whole process as
follows: hip washing 15s, then oscillating cleaning 15s, then drying 2 minutes.
The water pressure is lower than adults. This function is still workable if kids
body not in seat sensor area.
All currently operating
functions will stop by press this button
Press this button the nozzle cleans itself for 2 seconds.The whole process as
follows: hip washing 30s, then oscillating cleaning 30s,then drying 3 minutes.
Press Bidet(or Wash Women) button before auto,the flushing will be feminine
wash.
Press this button will start warm air drying which will last 5 minutes or stop
automatically after user left. Press "Dry Temp" to adjust the warm air
temperature. There are 5 levels from room temperature to 102
℉.
Lighting/Enema
bidet
bidet
bidet
