The rear of the radio has
n
RS232 Port
for future programming,
interface with external systems and
additional external control over the radio
o
DB15 pin plug for connection of the
wiring harness
p
BNC fitting for the antenna connection
LCD Display
TX (Transmit) Icon indicates that the
unit is transmitting. Note that after 30
seconds (default timeout) the unit will
automatically cease transmitting to
guard against a stuck or faulty PTT
switch.
RX (Receive) Icon indicates that a
signal is being received. Note that if the
squelch is fully opened (set at 0) then
the unit will continually receive either a
weak background signal or noise.
DUAL WATCH Lights up when the dual
watch button function is activated
LOW BATT indicates that the battery
voltage is low. A flashing icon indicates
that an over voltage situation exists.
MEM Indicates functions of the memory
modes. Please see below for additional
explanation.
Middle Line Displays the active
frequency
Bottom line Displays the standby
frequency and other status text.
Release 1.7
© XCOM Avionics 2005
www.xcom760.com Page
8
