The function of special Mode C<10> (Memory key):
For example: If you want to press the RT button twice thenreload bulletsby pressing X key, and set
this sequence of action on the RT button.
The steps are shown below:
1.Press the “P” button on the XCM FPS Programmer device. The “P” LED indicator <7> will light up.
2.Press the Mode C button <10>. The C LED indicator <9> will light up.
3.Press the RT button (on your controller) twice then press the X key. The RT and X LED indictor on
the device are both lit up.
4.Now press the C button (on the device) again and the C LED indicator <9> (on the device) will
begin to blink.
5.Finally presses the RT button on the controller and the RT and X key LED indicator on the device
are both off. The C LED indicator <9> (on the device) stops blinking and lights up. The setting is
completed.
