Xclef HD-500, User Manual

Page: 37 / 56

32
3. Encoding Mode
Encoding
This mode allows you to receive audio signals from an external audio player through the line-in jack and
encode them into MP3 format.
1. Connect one end of the line-in cable to the earphone jack or output terminal of your audio
player and connect the other end to the line-in jack on this device.
2. While playing the track you want to convert into an MP3 file from your audio player, press the
Rec button.
3. The recording time and the remaining time appear on screen. If the Rec button is pressed again,
recording will pause.
4. When Encoding is finished, press the Stop button to put the device in Wait . Press the Stop
button again to save the encoded file in the ENCODE folder.
5. The screen will now show the contents of the folder.
6. Press the Play/Pause button to play the file.
Voice Recording
This feature enables you to record voice memos.
You use the built-in microphone to record a voice memo.
The procedure for recording a voice memo is the same as that of MP3 format encoding, except for the
line-in connection.
1. While the device is not playing, press and hold the Rec button to start the voice recording.
2. Press and hold the Rec button.
3. To stop recording, press the Stop button. The device will be set to Wait . Press the Stop button
again to save the file to the VOICE RECORD folder.
4. The screen shows inside of Voice Record folder
5. Press the Play/Pause button to play the file.