background image

16

15000000 XciteRC Hotbee 3D Quadrocopter

EN

Warnings and safety notes

Warnings and safety notes

The following safety instructions must be strictly observed. For property damage, personal injury or conse-
quential damage caused by improper use or non-observance of the safety instructions the XciteRC Modell-
bau GmbH & Co. KG accepts no liability. In these cases, the warranty becomes void.
Move your model always with the maximum caution and responsibility, otherwise it may cause damage to 
other property or even physical injury. We therefore recommend to secure the operation with a third party 
liability insurance. If you already have a liability insurance policy, check before start-up the model, whether 
radio-controlled models are covered by a corresponding amount.

• 

 The product contains small parts that can cause injury if swallowed, and must therefore be kept 

away from children under 3 years.

•  The product is not a toy and not suitable for children under 14 years.
•  The operation of radio-controlled models requires practice. In the beginning operate your new model 

therefore with extra caution and familiarize yourself with the response to your commands.

• 

  WARNING:

 The safe operation requires concentration and quick reaction. Do not operate your 

model if you are tired or under the influence of drugs or alcohol – 

risk of accident and injury!

• 

 WARNING:

 The control of this model is done via radio signals, which can be influenced by the 

environment. This may cause a suddenly loss of control of your model. 

The model may only be operated 

on a suitable and sufficiently large room without obstacles.

•  Operate your model therefore only with sufficient light within line of sight, away from cars, traffic and peo-

ple – 

risk of accident and injury!

• 

 ATTENTION:

 due to the small size and weight, the model should not be exposed to drafts or a 

strong winds. Avoid flights near open windows or air-outlets of an air-conditioning system - 

crash haz-

ard!

•  Do not operate your model during a thunder storm or near radio towers or power lines.
•  Radio remote controlled models may not be operated at any public space by implication (streets, roads, 

squares or lakes). Before operation please ask where the operation is allowed. This also applies to private 
property, here the consent of the owner is required.

• 

 WARNING:

 Keep your fingers or loose clothing or hair away from the rotating parts or the propeller 

/ rotor unit - 

risk of injury!

•  Always switch on the transmitter first, then the model. 

NOTE:

 during the operation of the transmitter must 

remain switched on!

•  Never operate your model with low transmitter batteries, because this reduces the range of your model 

dramatically.

•  If the drive battery is empty, the model first slow down until it no longer reacts properly to your commands. 

Stop the operation and change the drive battery or charge it again.

•  Pay attention to the instructions and warnings for this and any other equipment used by you (chargers, 

rechargeable battery packs, etc.).

• 

 WARNING:

 Keep packaging material, small parts, chemicals and electrical components away from 

children – 

risk of accident and injury!

• 

 

The model and the transmitter may be neither get humid nor wet, especially the electronic compo-

nents (receiver, speed controller, servo) and, if used, lithium batteries, are not waterproof! The model may 
not be used in the rain (or heavy fog), do not drive in wet grass or through puddles or snow. 

WARNING:

 

Fire or explosion due to moisture in lithium batteries!

•  Plastic parts (eg. fuselage or main blades) is less flexible and can break more easily at cold temperatures 

(below 10 ° C).

•  The modification of the model is not permitted for safety and CE approval regulations, which applies in 

particular to the transmitter, receiver and speed controller. Maintenance or repairs using original replace-
ment parts are excluded.

15000000-Hotbee-3D-Quadrocopter-Anleitung.indd   16

25.09.2013   13:45:17

Summary of Contents for Hotbee 3D

















Reviews: