22
22
XciteRC ALPHA-EGG
EN
The remote control system
·
Battery charging
[1]
[2]
The remote control system
Here you get an overview of the remote control system of your XciteRC ALPHA-EGG and its various features
and settings. Before the first flight, you should absolutely have read and understood all these functions and
settings.
• Do make sure that the transmitter is turned off - POWER-LED off.
• Now open the battery compartment cover on the backside of the transmitter. Remove the srew with the
screwdriver and open the cover (1).
• Insert 2 AAA-batteries into the battery compartment of the transmitter (2). Pay attention to the correct
polarity!
2x AAA batteries
• Close the battery compartment cover.
• During flight the POWER LED must lit.
ATTENTION:
if the POWER LED flashes or does not light at
all, the model may not started –
crash hazard!
Change transmitter batteries immediately.
•
WARNING:
check the POWER LED also during operation. If the POWER LED starts to blink, stop
operation, switch the model off and replace the transmitter batteries –
crash hazard!
•
ATTENTION:
The maximum range of the remote control system is about 40 meters, do not fly
farther away under any circumstances!
Transmitter
ON/OFF-switch
Trim
left/right
Control lever
(press to change
speed level)
Start/stop
motors
Trim
forward/reverse
Status-LED
Throttle lever
(press for
360° flips)
Headless-
Mode
Battery charging
WARNING:
Be sure to read all safety instructions regarding the use of rechargeable batteries. Charging
may take place only with the supplied charger on a fireproof surface and under constant adult supervision -
fire or explosion hazard!
Frequency: 2.4 GHz
Transmitting power: 10 mW
Summary of Contents for 15060000
Page 17: ...17 XciteRC ALPHA EGG DE ...
Page 34: ...34 XciteRC ALPHA EGG ...
Page 35: ...35 XciteRC ALPHA EGG ...
