Page 2 of 3
Product Name:
V1
INSTALLATION & OPERATING INSTRUCTIONS
Can cause serious
eye damage. In case
of contact with eyes,
irrigate with water &
seek medical advice.
Use it in well
ventilated area
only. Spillage
must be cleaned
immediately.
No naked flames.
Keep out of reach of
children
.
WARNING!
Remove the product from its packaging.
Measure the length of the strip required for the installation.
The strip can be cut to length at 50mm intervals at the indicated position.
Remove the foil seal from the silicone glue tube and install the nozzle.
Apply silicone glue in to the silicone end cap and the cut end of the LED strip.
Insert the strip in to the end cap and ensure good seal with the silicone glue.
Remove backing paper and attach LED strip to a clean, flat and dry surface.
Continue to install the strip, ensuring good contact with the mounting surface.
