4
In-Ground Post Assembly
1. For best appearance, space posts at uniform distances. To minimize rail cutting, space to utilize full
panel sections
2. Dig holes 18” to 24” deep and about 6” wide for each post location.
3. You don’t need to worry about making all posts the same height, as they can be easily cut to match
once posts are set.
4. Be sure to use a level to make sure the posts are 90 degrees
5. When setting the distance between the posts, leave ¼” on each side as buffer.
6. Make sure cement is set to dry before installation of the fence panels.
Concrete Post Assembly
1.
Install Floor Flanges or Posts with Flanges for concrete flooring
2.
If Floor Flanges are used, be sure to secure posts with Flange with Tek Screws
3. Mark location of holes on the floor prior to drilling
Drill 1/4” holes into masonry surface to a depth of 1-5/8”.
Attach nut and strike with a hammer until anchor has expanded and seated properly.
4. Tighten nuts snugly using adjustable or socket wrench.
5. Using a level, make sure posts are plumb (if not, tighten or loosen bolts)
THANK YOU FOR PURCHASING OUR PRODUCT LINE!
