background image

8

9

Technical Data

Power Supply 

240V 1-Phase ±15%

Rated Input Power  

9.0 kVA

I

 

i

eff

 

as per AS/NZ60974-1

 

15 Amps

Rated Output  

200 Amps / 28V MMA

200 Amps / 18V TIG

Welding Current Range 

10 ~ 200 Amps

No Load Voltage 

(OCV) 

 

VRD On 9V - Off 77V

Duty Cycle @ 40ºC 

as per AS/NZ60974-1

  25% @ 200 Amps MMA 

25% @ 200 Amps TIG

Duty Cycle @ 25ºC 

(approximate)

 

40% @ 200 Amps MMA 

40% @ 200Amps TIG

 

Power Factor  

0.99

Protection Class 

IP21S

Insulation Class  

F

Dimensions 

(LxWxH) 

 

365 x 135 x 227mm

Weight

 

 

6.5 Kg

Certification Approval 

AS/NZ60974-1

Features

 

New 40KHz inverter frequency technology

PFC 

(Power Factor Correction)

 for maximum electrical efficiency

MMA function

 (Stick electrode)

- Selectable On/Off VRD

 (Voltage Reduction Device)

- Hot start 

(improves electrode starting)

- Arc Force

 (boosts current to prevent electrode extinguishing)

- Excellent arc stability with all electrodes

DC-TIG

- Lift Arc ignition

 (prevents tungsten sticking during arc ignition)

- Ultra smooth DC-TIG welding current

Thermal overload protection

IP21S rating for environmental/safety protection

Generator compatible

 (recommend 9.0 kVA minimum)

Auto-compensation for voltage fluctuation

Minimal harmonic feedback to power grid

RAZORWELD ARC200

MMA/TIG - 200 Amp DC Inverter Welder

Welds: Steels, Stainless, Cast Iron, Bronze, Copper

 

Razor

Weld

Product Code: XA-ARC200RZ-K

Standard Package includes: ARC200RZ Machine, Earth Lead & Arc Lead 25mm x 4m

Overview

The RazorWeld ARC200 from Xcel-Arc is a high quality inverter welding machine with a primary function of DC-MMA (Stick) welding and 

additional  DC-TIG  function  incorporating  Lift-Arc  Ignition.  Produced  using  the  very  latest  generation  40KHz  IGBT  inverter  technology; 

 

this machine offers outstanding arc characteristics whilst also being highly reliable, robust and incredibly portable. The DC-MMA welding 

function delivers a smooth and incredibly stable arc, producing high quality welds including cast Iron, stainless and low hydrogen. With the 

inclusion of Hot-Start and Arc Force coupled with Selectable VRD and Power Factor Correction (PFC), this machine is perfectly suited to 

site work and is an ideal choice for the welding professional or contractor. Connection of the optional XA17V Tig Torch provides intermediate 

level DC-TIG welding of steel, stainless steel, bronze and copper. The Lift-Arc TIG function is superb and delivers perfect arc ignition every 

time without any sticking or inclusion of the tungsten electrode to the work piece and a remarkably smooth stable arc produces high quality 

TIG welds. The ARC200RZ is an exceptional machine suitable for a wide range of applications including medium to heavy industrial use, site 

welding, farming and general repair and maintenance work. The ARC200RZ gives you great portability with the power to get the job done.  

Built to our specification and manufactured in compliance to AS/NZ60974-1.

230V Single Phase 200 Amp DC Welder MMA/TIG 

Selectable VRD - Stick Electrode, Lift Arc DC TIG 

Industrial Rated with PFC (Power Factor Correction)

RAZORWELD ARC200

RAZORWELD ARC200

XA-ARC200RZ-K

Standard Package 

Optional machine accessories available - refer page 16

Summary of Contents for Razor Weld ARC180





























Reviews: