5
The Xcaper Personal Smoke Mask Kit
DONNING INSTRUCTIONS
Open the foil bag by tearing at any of the four
notches located on the side edges near the
corners of the bag.
Do not open the foil bag
until the mask is needed in an emergency.
Before removing the mask from the foil bag,
massage the mask through the bag between the
palms of your hands for 1 to 2 seconds. Then,
remove the mask from the foil bag. The mask
will feel cool and moist to the touch.
Place your nose and mouth in the center of the
mask and pull both straps over the back of your
head. The longer strap should go above your
ears around the upper part of your head. The
shorter strap should go below your ears around
the lower part of your head. Adjust the straps to
where the mask feels most secure. In the
unlikely event that one of the straps beaks, hold
the mask over your mouth and nose with a free
hand.
Remove the goggles from the protective plastic
case. Place the goggles over your eyes and pull
the strap over the back of your head. Adjust the
goggles to where they are most comfortable.
Xcaper
®
Personal Smoke Mask Kit
Manufactured by
Xcaper Industries, LLC
PO Box 17119, Irvine, CA 92623
1-800-368-5705
www.xcaper.com
