Xblitz X6, User Manual, Page: 13 / 60

13
10. Do not expose this unit to extreme heat or fire.
11. If you smell burning plastic or electronics from the camera, unplug the
device as soon as possible and contact customer service.
09. FAQ
1. The device does not turn on/off.
The reason for this behavior may be a constant power source in the car
cigarette lighter socket.
2. The device restarts while driving.
It is recommended to check the power source.
3. The device does not record in a loop (it records randomly).
Check “motion detection” setting – it should be turned off.
4. The device shows “card full” message.
Check “G-sensor” and “parking mode” and set them to minimum. The card
should be formatted in FAT32 format first in your computer, then in the DVR.
5. The device records noisy, distorted, unclear sound.
The device has a very sensitive microphone which records all background
noises. The recorded sounds may overlap. The windshield air intake may also
distort the sound.
6. The device does not respond.
Briefly press RESET or reset the unit to factory default settings.
7. Cross stripes appear on the recording.
Incorrect setting of the frame rate value. Set the frequency value to 50Hz or
60Hz depending on local settings.
10. NOTES
1. Due to continuous product improvement, the manufacturer reserves the
right to make changes to the device and its set without prior notice. Some
features described in this manual may differ slightly from reality.
2. Use only the original charger with 5V/1.5A charging current. (Do not plug
directly into a 220/230V outlet). Failure to comply may result in damage to
the camera or lead to dangerous situations.
11. SPECIFICATIONS
Movie angle: 140 degrees
Video format: 1920x1080
Video format: codec: MOV-H.264
Lens aperture: F2.0
ISO: Automatic
Photo format: JPG
Microphone: Yes
Speaker: 8 Ω/0.5W