Xblitz S3 Duo, User Manual

Page: 16 / 36

16
6. Do not expose the device to damage and physical impact.
7. Keep the product clean, especially the lens. Do not use detergents or chemicals
when cleaning.
8. Clean only when the device is disconnected from the power supply.
9. Keep the device out of the reach of children.
10. Do not expose the device to very high temperatures and fire.
05. FAQ
1. The device does not turn on, the screen flashes:
Connect and charge the device before starting it to ensure the battery is fully charged.
2. The device does not turn On/O automatically:
The reason for this may be caused by the power supply in the cigarette lighter socket
not being constant.
3. The device restarts while driving:
It is recommended to check the power source that the device is connected to.
4. The device does not record in Loop (records randomly):
Check the setting of the functions selected on the device (motion detection "and"
parking mode "- both should be turned o while driving).
5. The device shows the message "card full":
Check the "G - Sensor" and "Parking Mode" functions and set them to the minimum.
The card should be formatted in the FAT32 format first on a computer, and then
on the dashcam.
6. The device records noise, distorted, or unclear sound:
The device has a very sensitive microphone that records all ambient sounds from the
surroundings. Recorded sounds may overlap. Windshield airflow can also distort the
sound.
7. The device is not responding:
Briefly press the Reset button or restore the device to factory settings.
8. Recording displays distorted lines:
This may be caused by the refresh rate of the image setting being incorrect. Set the
frequency value to "50Hz" or "60Hz" depending on your local settings.
Due to the continuous improvement of products, the manufacturer reserves the right
to change the device and its set without prior notice. Some functions described
in this manual may be slightly di erent from the actual.
WARNING! Only use the original 5V charger. Do not connect directly to a 220/230V
socket. Not following the given instructions may lead to damage to your device and/
or hazardous situations.