Xblitz RF400 CAM, User Manual

Page: 47 / 94

47
10. Do not disassemble the device. It is a fire and electrocution hazard. Improper
use or installation of the device voids the warranty.
11. Use only in cars with 12V power supply and negative ground. Using the device
di erently is a fire and electrocution hazard and can damage your car. The device
was designed only for use in vehicles!
12. Only use circuit breakers that have proper parameters. When changing circuit
breakers, make sure that the new one has the same nominal voltage as the pre-
viously installed one. Using a di erent circuit breaker is a fire hazard and can
damage your vehicle.
13. Do not block the device’s ventilation, as it can lead to circuits overheating and
cause a fire. Install the device in a way that ensures proper ventilation. Ventilation
openings on the sides of the device should remain uncovered.
14. Make sure that the device is properly connected. Improperly connecting the
device is a fire hazard and can damage your vehicle.
15. Before installation, make sure that you took the negative terminal o the
battery. This will prevent electrocution, short circuiting and malfunctioning of the
device.
16. When connecting the device, to not cut the cables or damage their insulation.
It can cause a short circuit and is a fire hazard.
17. Before drilling in your car or putting any screws in, make sure you won’t
damage any parts inside the casing.
18. Make sure that the cables are not wrapped around other objects. Place cables
in a way that makes sure they will not disturb you when driving. Cables that
impede your movement or hang loosely next to the gear stick, hand brake etc.
can be extremely dangerous(e.g. USB cable connecting an external media player to
the device).
19. In case of device malfunctioning, turn it o and immediately contact the
authorized service point. Malfunctioning can be easy to spot (e.g. no sound, bad
smell, a foreign object in the device etc.).
20. Make sure no unwanted object are in the USB port or the SD card slot, as that
can cause irreversible damage.
21. Protect the device dust, moisture, liquids, heat, cold and mechanical damage,
as well as direct sunlight.
22. When connecting the device, make sure that the cable insulation is not
damaged and that there are no sharp objects near the cables.
23. The warrenty does not cover damage caused by improper use or installation
of the device.
24. Due to constant improvements, technical specifications and design of the
device can change without prior notice.
EN