![background image](http://html1.mh-extra.com/html/xblitz/r4-power/r4-power_user-manual_3172746012.webp)
12
Xblitz R4 Power Hardwire Kit is a simple solution
that allows you to connect any dashboard camera
to use the mode Parking.
The Xblitz R4 Power Hardwire Kit is compatible with
12V/24V DC power supply, so it can be used in cars
and trucks.
01. INSTALLING THE XBLITZ
R4 POWER KIT
1. Connect the BLACK wire (GND) to the ground/ mass
of the vehicle.
2. Connect the RED wire depending on how you want
to use your dashboard camera:
a. Connect the RED wire to the ACC circuit so that the
camera system starts automatically when the engine
is ignited.
b. Connect the RED cable to the vehicle battery for the
camera to record non-stop, 24/7.
The Xblitz R4 Power kit will automatically stop your
camera from over discharging your vehicle battery. If the
voltage in the battery is too low, the Xblitz R4 Power will
stop powering your camera. You do not have to worry that
your battery will be exhausted by the camera recording
while the vehicle is parked. Set the voltage limit before
the power cut-o for the camera according to the table
below (the diagram may not correspond to your battery
type).
Summary of Contents for R4 POWER
