X8821e/X8821m / X8824e/X8824m User’s Guide
13
Testing your Setup
Once you have connected your hardware and configured your PCs, any computer on
your LAN should be able to use the device’s DSL connection to access the Internet.
To test the connection, turn on the device, wait for 30 seconds and then verify that the
LEDs are illuminated as follows:
LED
Behavior
Power
Solid green to indicate that the device is turned on. If
this light is not on, check the power cable
attachment.
LAN
Solid green to indicate that the device can
communicate with your LAN.
WAN
(ADSL)
Flashing on/off while trying to SYNC UP with ISP
CO site. Solid green to indicate that the device has
successfully established a connection with your ISP.
PPP
(Internet)
When it turns solid ON that means the device
establish a PPP link with ISP.
If the LEDs illuminate as expected, test your Internet connection from a LAN computer.
To do this, open your web browser, and type the URL of any external website (such as
http://www.yahoo.com
).
If the LEDs do not illuminate as expected, you may need to configure your Internet
access settings using the information provided by your ISP. If the LEDs still do not
illuminate as expected or the web page is not displayed, see
Troubleshooting
section or
contact your ISP for assistance.
