X8824r User’s Manual Version 1.0
73 / 102
Chapter 3
Quick Protocol Setup
1. Overview
This chapter provides quick steps on setting up the protocols on this
device. From this point on, configuration steps are listed for each of
the protocols in their respective sections. The seven sections are:
A. RFC 1483 Bridge
B. PPPoE Route Configuration
C. RFC 1483 + NAT
D. PPPoA Route Configuration
E. IPoA Route Configuration
F. DHCP
Configuration
G. NAT Configuration
Note
: The settings/parameters listed in the next few sections only
provide an example to setting up the protocols. Contact your ISP for the
actual settings
X8824r User’s Manual Version 1.0
74 / 102
2. RFC 1483 Bridge
Configuration Table:
Protocol RFC1483
Bridge
Mode.
WAN IP
The ISP assigns the IP address, or have an IP
address assigned from an external/internal
DHCP server.
Modem IP
192.168.1.1
Gateway IP
None.
VPI/VCI
8/81
1. Click on the
WAN
tab to view its sub-menu’s and configure the
WAN settings, then click on the
ATM VC
link below it.
2. You will then see the ATM VC Configuration table. Click on the
Add
button to add a new VPI/VCI setting.
