Xavant STIMPOD NMS 450X, Manual

Page: 7 / 26

NMS
450
X STIMPOD
Intelli Cable Software: NMShow
4
1. Enter a username in the Username field. The username should be at least 4 characters long and
may not be the same as another user’s username on the same device. When all the fields are filled in and
the Create button is clicked, the application will check if the user already exists and inform the user if this is
the case.
2. Enter your full name in the Name field. This field is not validated and optional.
3. Enter a password in the Password field. The password should be at least 6 characters long.
Please be sure to keep the password in a safe place to ensure the user’s data is secure as a password
cannot be recovered.
4. Retype the password in the Repeat field.
5. Click the Create button. This will create and save the user before returning to the login screen.
Fig. 3:
User Login
If a user has been created, proceed to log in using the steps below. If a user has not been created yet, please see the
Create a New User section. The Login Screen will display when the application is open. It can also be accessed from the
Create User screen by clicking the Go to Login button
1
2
3
4
5