Safety Instructions
WARNING
ELECTRICAL SHOCK AND FIRE HAZARD
n
All wiring should be done by qualified personnel to ensure
compliance with all applicable installation codes and
regulations. Design the power system using a certified
recreational vehicle and PV system designer and install using
a certified RV technician.
n
Comply with all applicable installation codes and regulations.
n
Do not connect to power sources during installation.
n
Connect only PV modules of the same size and rating to build
a PV array. Mixing and matching different PV modules are not
recommended.
Failure to follow these instructions can result in death,
serious injury, or equipment damage
NOTICE
EQUIPMENT DAMAGE
Check that the maximum open-circuit voltage of the PV array, which
includes a 25% safety factor, does not exceed the charge controller's
maximum PV open circuit voltage of 50V.
Failure to follow these instructions can result in charge
controller damage.
975-1012-01-01 Rev B
Oct 2019
15
Summary of Contents for SOLAR CHARGE CONTROLLER 30
Page 1: ...Owner s Guide 30A PWM Charge Controller 709 3024 01...
Page 38: ......
Page 39: ...This page has no content...