![background image](http://html1.mh-extra.com/html/xantrex/rs232-hpd/rs232-hpd_operating-manual_3202420009.webp)
Release 1.1
vii
About This Manual
This technical manual is for the RS-232 Interface, a microprocessor-controlled
option card for all models of XT and HPD Series DC output power supplies. This
manual provides you with specifications, user options, and configuration
instructions for the interface, along with a command set which allows you to control
your power supply from a computer console. Error messages and calibration
procedures are also included.
This manual is designed for the user who is familiar with basic electrical theory
especially as it applies to the operation of power supplies. This implies a recognition
of Constant Voltage and Constant Current operation modes and the control of input
and output power, as well as the observance of safe techniques while effecting supply
or pin connections and any changes in switch settings. The user should also have
experience with a computer-based communications software package.
Refer to your power supply manual for installation, configuration, and operating
procedures for your power supply.
Main Sections
Section 1 Features and Specifications
Describes the interface and lists its
features and specifications.
Section 2 Installation and Configuration
Gives basic setup procedures.
Describes inspection, cleaning, shipping, and storage procedures.
Section 3 Operation
Lists the complete command set, status registers, and error
codes.
Section 4 Calibration
Provides detailed procedures for voltage and current
mode calibration as well as over voltage protection (OVP) calibration. Includes
calibration for programming and readback accuracy.
Manual Revisions
The current release of this manual is listed below. Updates may be issued as an
addendum.
Release 1.1 (2002-06)
Summary of Contents for RS232-HPD
Page 2: ......
Page 10: ...About This Manual viii Operating Manual for RS 232 for XT HPD Series Power Supply ...
Page 61: ......