background image

975-0059-01-01 Rev A

WA–1

Warranty and Return Information

Warranty

What does this warranty cover?

This Limited Warranty is provided by Xantrex Technology, Inc. ("Xantrex") 

and covers defects in workmanship and materials in your 

Inverter Stacking Control – Series Cable

. This warranty 

period lasts for 

two (2) years

 from the date of purchase at the point of sale to you, the original end user customer. You 

require proof of purchase to make warranty claims.
This Limited Warranty is transferable to subsequent owners but only for the unexpired portion of the Warranty 
Period.Subsequent owners also require proof of purchase.
What will Xantrex do? 
Xantrex will, at its option, repair or replace the defective product free of charge, provided that you notify Xantrex of 
the product defect within the Warranty Period, and provided that Xantrex through inspection establishes the existence 
of such a defect and that it is covered by this Limited Warranty. 
Xantrex will, at its option, use new and/or reconditioned parts in performing warranty repair and building 
replacement products. Xantrex reserves the right to use parts or products of original or improved design in the repair 
or replacement. If Xantrex repairs or replaces a product, its warranty continues for the remaining portion of the 
original Warranty Period or 90 days from the date of the return shipment to the customer, whichever is greater. All 
replaced products and all parts removed from repaired products become the property of Xantrex.
Xantrex covers both parts and labor necessary to repair the product, and return shipment to the customer via a 
Xantrex-selected non-expedited surface freight within the contiguous United States and Canada. Alaska and Hawaii 
are excluded.  Contact Xantrex Customer Service for details on freight policy for return shipments outside of the 
contiguous United States and Canada.

How do you get service?

If your product requires troubleshooting or warranty service, contact your merchant. If 

you are unable to contact your merchant, or the merchant is unable to provide service, contact Xantrex directly at:

Direct returns may be performed according to the Xantrex Return Material Authorization Policy described in your 
product manual. For some products, Xantrex maintains a network of regional Authorized Service Centers. Call 
Xantrex or check our website to see if your product can be repaired at one of these facilities.

What proof of purchase is required?

In any warranty claim, dated proof of purchase must accompany the 

product and the product must not have been disassembled or modified without prior written authorization by Xantrex. 
Proof of purchase may be in any one of the following forms:

The dated purchase receipt from the original purchase of the product at point of sale to the end user, or

The dated dealer invoice or purchase receipt showing original equipment manufacturer (OEM) status, or

The dated invoice or purchase receipt showing the product exchanged under warranty

Telephone: 1 800 670 0707 (toll free North America)

1 360 925 5097 (direct)

Fax:

1 800 994 7828 (toll free North America)
1 360 925 5143 (direct)

Email:

[email protected]

Summary of Contents for power Inverter Stacking



















































Reviews: