![background image](http://html1.mh-extra.com/html/xantrex/ph1800-gfp/ph1800-gfp_installation-manual_3176236025.webp)
Applications
975-0289-01-01
1–5
Applications
The PowerHub 1800 can be used for the following entry-level
applications.
Softwired Generator Applications (Plug-and-go)
The PowerHub 1800 comes assembled with an AC input cord. This AC
cord can be plugged into a 120 Vac outlet on a generator to charge the
batteries.
Important:
The input cord is intended to allow connection to portable
generators in non-permanent installations. For fixed permanent installations, use
electrical code-compliant wiring methods.
Important:
The total amount of output power available to power the loads is
1440 watts, due to the 15 A supplementary protector which protects the circuitry.
Figure 1-4
Softwired Utility or Generator Applications
120 Vac Outlet
Important:
The combination of
loads cannot exceed 1440 W.
Run-times will depend on the
amp-hour rating of the batteries.
AC Generator
AC OUT
975-0289-01-01(PowerHub_1800_IG).book Page 5 Thursday, June 4, 2015 9:49 AM
Summary of Contents for PH1800-GFP
