![background image](http://html1.mh-extra.com/html/xantrex/isc-s/isc-s_installation-manual_881337017.webp)
The ISC-S Cable
975-0059-01-01 Rev A
1–5
The ISC-S Cable
Required accessory
cable
Stacking two identical inverters requires the use of the
Inverter Stacking Control –
Series Cable
(
ISC-S cable
). The
ISC-S cable
is a special cable specifically
designed for series-stacking two identical inverters. It consists of one 36-inch
stacking control cable with two 25-pin D connectors. It connects to the “Stacking
Ports” on the respective inverters and allows the AC output of two (identical)
inverters to provide both 120 and 240 Vac, 60 Hz.
CAUTION: Damage to Equipment
Do not use a standard computer cable in place of the
ISC-S cable
cable. This ISC-
S cable is custom made for Xantrex to allow series-stacking with the SW Plus
Inverter/charger. Look for the label as shown in
to properly identify the
cable.
Use of any other cable may damage your inverters and will not be covered by
Warranty/ Repair.
Figure 1-3
Inverter Stacking Control – Series Cable
(
ISC-S cable
)
Xantrex ISC-S Cable
CAUTION: This cable is designed
for series stacking of the SW,
SW Plus, or PS inverters only.
Use of any other cable may damage
your inverter and void it’s warranty.
Summary of Contents for ISC-S
