![background image](http://html.mh-extra.com/html/xantrex/gt100-208/gt100-208_operation-and-maintenance-manual_881403109.webp)
Commissioning Test Record
153378
B–3
Commissioning Test Record
Step 1. Record and Document Serial Number and Inverter Location
Date and Time of Commissioning:
Inverter Serial Number:
Technician Name:
CCU2 Board Serial Number:
Company Name:
Inverter Location: Bldg. #
Contact Email:
Address:
City:
State:
Step 2. Installation and Cable Check
Power Conductors installed correctly: Yes
Terminations are properly torqued: Yes
Step 3. Verify AC Utility Voltage at TB1
A-B Measurement:
B-C Measurement:
C-A Measurement:
Phase Rotation: CW
Step 4. Verify DC PV Voltage at TB3 and TB4
Pos - Neg Measurement: _________Vdc.
DC Polarity is correct: Yes
Step 5. Apply AC Grid Voltage to the GT100
Control Power circuits energized: Yes
Notes:
Step 6. Confirm Operation of Universal Frontpanel Control Unit
UFCU Boots and Displays correctly: Yes
PV Disconnect Switch Fault Clears: Yes
Software version (CCU2 SW):
Software version (UFCU SW):
Notes:
Step 7. Confirm Write Menu Parameters for AC Limits
Max AC Volts %:
Min AC Volts %:
Max AC Frequency:
Min AC Frequency:
Max GND Fault:
Notes:
Step 8. Confirm Write Menu Parameters for PV Settings
PV V Start:
PV T Start:
PV P Stop:
PV T Stop:
Notes:
Step 9. Confirm Write Menu Parameters for Power Tracker Configuration
PPT V Ref:
I PPT Max %:
PPT Enable:
PPT Rate:
PPT V Rate:
Notes:
Step 10. Commanding Goal State: Matrix Test
GT100 enters Matrix Test mode: Yes
Notes:
Step 11. Operate the GT100 in Power Tracking Mode
I PPT Max% initially set to10 %: Yes
I PPT Max % gradually increased
GT100 operates correctly: Yes
to 100 %: Yes
Notes:
Summary of Contents for GT100-208
