Terminal Configuration
M370078-06
2-23
3. Click the
ASCII
Setup
button.
The ASCII Setup dialog box will appear as shown in Figure 2-26.
4. Verify that the ASCII Sending and ASCII Receiving boxes are
checked as shown in
5. Click
OK
.
Establishing Communication with the Power Supply
To establish communication with the power supply:
1. In the main HyperTerminal window, click
Call
. See Figure 2-27.
2. To verify that the XG unit is connected and functioning, type the
following command
"*ADR <#>;*IDN?"
where the
<#>
should
be replaced by the address assigned to the power supply in the
“Selecting ENET as the Communication Port” on page 2–17
.
3. Verify that the XG unit responds with the ID string.
4. To save your session for future use, click
File > Save As….
Figure 2-26
ASCII Setup Dialog Box
Summary of Contents for GRIB and Ethernet interface
