http://www.xantrex.com
Freedom e-GEN System Installation Guide for OEM Installers
975-1027-01-01 Rev A
Jan 2021
Copyright © 2021 Xantrex LLC. All Rights Reserved.
All trademarks are owned by Xantrex LLC and its affiliates.
5
busbar
busbar
vehicle
second
alternator
vehicle
engine
Balmar
regulator
neg(–)
pos(+)
LCD
display
low battery
alarm LED
remote ON/OFF
reset button
System Remote Panel
vehicle
ignition system
engine battery
key ignition
1
6
5
9
2
3
4
BMS
neg(–)
pos(+)
field
ALT Temp (–)
Amp Seal
connector
ALT Temp (+)
10A 32VDC BLADE
butt splice/spade connector
1A 32VDC
BLADE
System Diagram for Communication Connection
EQUIPMENT DAMAGE
The system diagram is for information and illustration purposes only. Always use a professional
installer that satisfies the requirements for a qualified personnel.
Failure to follow these instructions can result in damage to equipment.
NOTE
:
• The diagram is for information and illustration purposes only. Images are
not-to-scale.
• Route data cables away from devices that can potentially interfere with data
communications.
CAN_H - pin 11
CAN_L - pin 1
CAN_Shield - pin 12
DC+ with inline 5A fuse
NOTE
:
• Termination of wires from the 20-pin
harness is dependent on the connector
type used for CAN network integration.
• CAN connectors vary. Use correct type
only.
pin A - CAN_H
pin B - CAN_L
pin C - CAN_Shield