Xantrex C40R/100 Remote, Installation Manual, Page: 23 / 34

975-0123-01-01 Rev A
17
5 Operation
Status Indicator
The multicolor LED indicates the operating status of the controller. A
color-coded label is included on the cover of the controller explaining
the status LED’s indications.
•
When in Charge Control mode, the LED will be green.
• When in Load Control mode, the LED will be red.
• When an Error Condition exists or the load has been disconnected,
the LED will be orange.
• When battery equalization is in process, the LED alternates
between red and green.
See the Owner’s Manual for the C-Series Multifunction DC Controller
for additional information about the LED Status Indicator.
Important:
The green and red LEDs only indicates the particular
operating mode and the battery voltage level. It does not indicate whether the
charging source is functioning properly.