975-1042-01-01
19
SoC (State of Charge)
The state of charge of the battery can be seen in two different
ways. There is a visual representation with three green LEDs.
Refer to the table below for exact percentages based upon the
LEDs.
State of Charge (%)
LED Indicators
100%
67–99%
34–66%
0–33%
Table 2 Charging State
ON |
OFF |
flashing at 0.5 Hz
State of Disharge (%)
LED Indicators
100–67%
66–34%
33–0%
Table 3 Discharging State
ON |
OFF |
flashing at 2 Hz
A more precise number for SoC can be seen by downloading the
Xantrex App and remotely connecting to the battery by
Bluetooth. A general SoC % gauge will be on the monitor page
of each battery.
NOTE
: The SoC graph will not fill linearly as the battery is
charged. The internal BMS will hold the SoC at
approximately 90% while the internal cell balancing circuit is
activated. Once the cell balancing has reached a threshold the
SoC will raise to 100%.
Summary LED
The summary LED on the remote panel will indicate by way of a
steady light or flashing whether the battery is charging or
discharging, respectively. If an event is detected, the LED will
alert you by changing its flash pattern.
State of Charge (%)
LED Indicators
0–100%
or
Alert
Table 4 Charging State
ON |
OFF |
flashing at varying frequency