2
Installation
NOTICE
RISK OF EQUIPMENT DAMAGE
• Do not connect multiple batteries in series. Parallel connection is permitted.
• The battery must be installed upright with the cable/terminal side up.
Failure to followthese instructions can result in damage to equipment and may void the warranty.
1. Check the battery for visible damage including cracks, dents, and deformations on the
body. The top surface and the battery terminals must be clean, dry, and free of dirt
and corrosion.
2. Make sure the 125Ah Battery is turned off. If the Power button LED is illuminated,
press and hold the Power button for three seconds until the LED turns off.
3. Select and place the battery in a clean, cool, and dry location.
4. Prepare the following:
l
terminal bolts sized M8 1.25x12mm (supplied)
l
lock washers (supplied)
l
flat washers (supplied)
l
battery cables terminated with M8 (or 5/16”) cable ring lugs (do not use
stainless steel lugs)
l
DC fuse (100A, 32V) and fuse holder
WARNING
HAZARD OF FIRE
Use only stranded, copper wire rated 75°C minimum. Make sure battery connections are tightened to a
torque of 106 in-lb (12 Nm) of force. Loose connections will overheat.
Failure to follow these instructions can result in death or serious injury.
6
975-0824-01-01 Rev A
February 2020
