![background image](http://html.mh-extra.com/html/xantrex/817-2000-12/817-2000-12_owners-manual_881384026.webp)
Before You Begin the Installation
12
Freedom X 2000 - 230V Owner's Guide
Before You Begin the
Installation
Before beginning your installation:
n
Read this entire Installation guide so you can plan the
installation from beginning to end.
n
Assemble all the tools and materials you require for the
installation.
n
Review the
Important Safety Instructions on page v
n
Be aware of all safety and electrical codes which must be
met.
WARNING
ELECTRICAL SHOCK AND FIRE HAZARD
n
All wiring should be done by qualified personnel to ensure
compliance with all applicable installation codes and
regulations.
n
Do not connect to AC and DC power sources during
installation. Disconnect from all power sources when
servicing.
n
Disable and secure all AC and DC disconnect devices
and automatic generator starting devices.
Failure to follow these instructions can result in death, serious
injury, or equipment damage
Installation Codes
Governing installation codes vary depending on the specific
location and application of the installation.
It is the installer’s responsibility to ensure that all applicable
installation requirements are met.
Installation Tools and Materials
You will need the following to install the Freedom X:
n
Wire stripper
n
Mounting (M2.5) screws or bolts
n
Phillips torque screwdriver
n
Torque wrench for DC terminals (13mm socket wrench)
n
AC cable (that is, two-conductor-plus-earth cable), sized
appropriately for load and application
n
PG16 strain relief clamps (for the AC cable clamp holes)
n
DC cable, sized appropriately for load and application
n
Lugs for DC cables to fit 8mm DC stud terminals as well as
appropriate tools (like a crimping tool)
n
AC and DC disconnects and over-current protective devices
n
AC bonding screw (see
for more
information)
Summary of Contents for 817-2000-12
