2.
If you have the Flex-type portable kit:
Figure 2 Unpack the accessories
hook
and
loop
a.
Take out the charge controller with the extension cable
from the side pouch.
b.
Attach the charge controller unit to the hook-and-loop
fastener on the panel's tilting leg.
c.
Take out the adapter battery cables from the side pouch.
3.
If you have the Rigid-type portable kit:
a.
Open the solar panel case and take out the adapter battery cables.
b.
Keep the solar panel case open with the solar cells facing the ground.
4.
Connect the adapter battery cables to the battery.
Figure 3 Connecting to a Xantrex-
branded RV sidewall SAE port
a.
If your RV is equipped with a Xantrex-branded sidewall
SAE port, you can connect the 11 ft (Flex Portable) or
12 ft (Portable) pre-wired battery extension cable's SAE
connector to the sidewall SAE port.
14
975-0809-01-01 Rev D
Dec 2019
Summary of Contents for 783-0100-01
Page 8: ...This page is intentionally blank...
Page 23: ...This page has no content...