XT-HDBT-EX100-4K18G-KIT
USER MANUAL
www.xantech.com
®
IR OUT
Power
MCU
Optical
HDMI
HDMI Out
Optical In
(ARC)
(ARC)
VS
Ethernet
IR IN
RS-232
HDBT In
Upgrade
15V 2A
Link
IR OUT
Power
MCU
Optical
HDMI
HDMI Out
Optical In
(ARC)
(ARC)
VS
Ethernet
IR IN
RS-232
HDBT In
Upgrade
15V 2A
Link
15V 2A
IR OUT
Power
IR IN
RS-232
HDBT Out
Upgrade
MCU
VS
Ethernet
Optical
(L/R)
HDMI
Audio Out
Optical Out
HDMI In
EDID
3 2 1
1
0
0
L
R
(ARC)
(ARC)
Link
15V 2A
IR OUT
Power
IR IN
RS-232
HDBT Out
Upgrade
MCU
VS
Ethernet
Optical
(L/R)
HDMI
Audio Out
Optical Out
HDMI In
EDID
3 2 1
1
0
0
L
R
(ARC)
(ARC)
Link
Panel Description
XT-HDBT-EX100-4K18G-TX
EDID Management
- Used to manage the video and audio
resolution output by the connected source device.
HDMI Link LED - LED will be lit when an active HDMI connection
is detected.
HDMI input - Connect to the HDMI output of the local source
device.
Optical audio output - TOSLINK audio output. Connects to local
AV amplifier when using Audio Return Channel (ARC) feature.
Analogue audio 2CH L/R output - Connects to third party audio
amplifier for audio breakout of either local HDMI or Audio Return
Channel from XT-HDBT-EX100-4K18G-RX. Note: Audio format
must be 2ch PCM.
Audio output selection switch - Select ARC output from HDBT
receiver as either HDMI or audio breakout via optical
analog L/R audio.
Ethernet port - RJ45 connector. Connect to local network switch
to extend 10/100 network to HDBaseT Receiver ethernet port.
Power port - Connect Xantech 15V DC power supply only. Note -
HDBaseT extender kit can be powered from either the Transmitter
or Receiver by using the power over cable (POH) feature.
Power LED indicator
IR OUT port - Connect to Xantech 12V Emitter (sold seperately).
Connection is used to control the local source device from
Xantech IR Receiver connected at the XT-HDBT-EX100-4K18G-
RX.
IR IN port - Connect to Xantech 12V IR Receiver (sold seperately).
Connection is used extend IR over the HDBaseT signal to control
devices located at the XT-HDBT-EX100-4K18G-RX end.
RS-232 port - Bi-directional RS-232 with XT-HDBT-EX100-
4K18G-RX RS-232 port.
HDBaseT output - RJ45 connector. Connect to HDBaseT input on
XT-HDBT-EX100-4K18G-RX.
Upgrade port - Used for firmware upgrade
Hardware upgrade selection switch
XT-HDBT-EX100-4K18G-RX
1
3
4
5
6
7
2
8
10 11
12
13
14
9
15
1
3
4
5
6
7
2
8
10
11
12
13
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Power port - Connect Xantech 15V DC power supply only.
Note - HDBaseT extender kit can be powered from either the
Transmitter or Receiver by using the power over cable (POH)
feature.
Power LED indicator.
IR OUT port - Connect to Xantech 12V Emitter (sold separately).
Connection is used to control the local source or display device
from Xantech IR Receiver connected at the XT-HDBT-EX100-
4K18G-TX.
IR IN port - Connect to Xantech 12V IR Receiver (sold separately).
Connection is used extend IR over the HDBaseT signal to control
devices located at the XT-HDBT-EX100-4K18G-TX end.
RS-232 port - Bi-directional RS-232 with XT-HDBT-EX100-
4K18G-TX RS-232 port.
HDBaseT input - RJ45 connector. Connect to HDBaseT output on
XT-HDBT-EX100-4K18G-TX.
Upgrade port - Used for firmware upgrade
Optical audio input - TOSLINK audio input.
HDMI Output - Connect to the HDMI input on local display device.
HDMI Link LED - LED will be lit when an active HDMI
connection is detected.
Audio return selection switch - Switch between ARC and
TOSLINK (Optical) when using Audio Return feature.
Ethernet port - Connect to local network products to extend
10/100 network from HDBaseT Transmitter.
Hardware upgrade selection switch
1
2
3
4
5
6
7
8
9
10
11
12
13
