background image

1

Remote Control Switchers

INSTALLATION INSTRUCTIONS

RMGATE

RACK MOUNT ADAPTER FOR THE GATEKEEP-IR

The RMGATE provides a convenient means for mounting the GATEKEEP-IR™ GMB9 assembly into a
standard 19 inch rack. It incorporates eight STATUS LED's that indicate a components ON/OFF condition.
The black anodized panel is a standard 7.00 inch increment height and is 3/16" thick.  Install the panel as
follows:

1. Mount the GMB9 to the rear of the RMGATE.  Refer to 

Fig.  2

 below.   Use the hardware that comes

with the GMB9 and the RMGATE.

2. Plug the 3.5-to-3.5mm Mono Mini Plug cables  (supplied) between the STATUS jack of each gate

module to the corresponding STATUS GATE IN jack on the RMGATE as shown (

Fig. 2

).  That is,

connect Gate 1 (slot #1) to GATE IN 1, Gate 2 (slot #2) to GATE IN 2, etc. Use the longer 18" cables
for the 4 gates to the left and the 12" cables for the remainder.

Fig. 1

  The RMGATE, Front View

AUX 1

AUX

SAT 1

SAT 2

VCR 1

VCR 2

TUNER 1

TUNER 2

DVD 1

DVD 2

GATEKEEP-IR

SOURCE

Fig. 2

  A GMB9 Gatekeep-IR™ Assembly Mounted to the Rear Surface of the RMGATE Rack Panel

12 VDC

CONFIRM

IR IN

POWER

+12V

G

IR IN

IR OUT

GMM1A

C I

CURRENT

SENSOR

THRESHOLD

ON

IR OUT

GCM1

STATUS

CONTROL

IN

ON

IR OUT

+

GEM1

STATUS

IN

OUT

ON

IR OUT

AUDIO

L

R

L

R

GAM1

STATUS

VIDEO IN

VIDEO OUT

ON

IR OUT

GVM1

STATUS

TEMPERATURE

SENSOR

ON

IR OUT

GTM1

THRESHOLD

STATUS

LIGHT

SENSOR

THRESHOLD

ON

IR OUT

GLM1

STATUS

STATUS

OUT

IN

POWER

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

GATE

IN

GATE

OUT

GMB9

(not included)

RMGATE RACK MOUNT ADAPTER 

(rear view)

Mount the GMB9 Gatekeep-IR assembly to the 4 studs on the rear of the
RMGATE using hardware included with the GMB9 and the RMGATE.

782-00 

Power Supply

(not included)

To 120 V AC

(unswitched)

0 - 12Volt

STATUS pass-thru'

for indicators, for

control of other

equipment, etc.,

as needed.

LED and STATUS

pass-thru' assembly

(included on RMGATE)

3.5-to-3.5mm Mono

Mini Plug cables (8 included)

2.1-to-2.1mm Power

Supply cable (included).

Gate 2

(Slot #2)

Gate 3

(Slot #3)

Gate 4

(Slot #4)

Gate 5

(Slot #5)

Gate 6

(Slot #6)

Gate 1

(Slot #1)

Unused

Slots

Reviews: