- 4 -
RF2IR2W Diagram (Front)
IR and RF LED behavior:
IR LED
RF LED
RF2IR2W Action
On
Flash
Emit IR Commands
Flash
Flash
Output RS232 Commands
Off
Flash
Receive RS232 Commands
Quick Start Instructions
Step 1. Plug the (4) 283M emitters (included) into the RF2IR2W. Next, place the 283M emitter head
directly over the IR eye on the source component to be controlled.
Step 2. Plug the RS232 Adapter Cable into the RF2IR2W port labeled RS232. Next, connect the DB9
plug to the source component to be controlled. In some instances, a null modem converter may be
required. Below is a pin-out of the RS232 Adapter Cable.
