Xantech PA635X, Installation Instructions Manual, Page: 3 / 12

Model PA635X Page 3
© 2001 Xantech Corporation
PA635X PANEL AND FEATURE DESCRIPTIONS
1. Front Panel . 19" X 3 1/2" panel designed for mounting into a standard 19" Rack Panel.
2. Rack Panel Handles .
1 2 3
PA635X
SIX CHANNEL AMPLIFIER
POWER
1 2
3
2 1
2
4
3
FIGURE 2 – THE MODEL PA625X FRONT PANEL – FEATURES AND FUNCTIONS
WARNING
TURN POWER
OFF BEFORE
CHANGING
MODES
REMOTE
MASTER
ON/OFF
CONTROL
5-30 VOLTS DC
+ --
LEFT RIGHT
SPEAKER
+ -- -- +
LEFT RIGHT
SPEAKER
+ -- -- +
LEFT RIGHT
SPEAKER
+ -- -- +
+ BRIDGED --
AC LINE
ON/OFF
LEFT RIGHT
1
LEFT RIGHT
2
LEFT RIGHT
3
STEREO
MONO
BRIDGED
MODE
STEREO
MONO
BRIDGED
MODE
STEREO
MONO
BRIDGED
MODE
+ BRIDGED -- + BRIDGED --
1V
.2V 3V
LEVEL
1V
.2V 3V
LEVEL
1V
.2V 3V
LEVEL
WARNING
: TO REDUCE THE RISK OF
FIRE OR ELECTRICAL SHOCK, DO NOT
EXPOSE THIS UNIT TO RAIN, MOISTURE
OR PLACE WATER FILLED OBJECTS ON
THE PRODUCT.
GROUND
USE CLASS 2
WIRING FOR
LOUDSPEAKERS
CAUTION
NEUTRAL
FUSING
ATTENTION
: RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR.
NO USER SERVICABLE PARTS INSIDE.
REFER TO OWNERS MANUAL FOR SAFETY INSTRUCTIONS.
ATTENTION
: POUR UN REGLAGE
CORRECT, SE REPORTER AU MANUEL
D’INSTRUCTIONS.
FUSE
6.25 AMP
SLOW BLOW
AC 120V 60Hz
5.5A 660 WATTS
THIS DEVICE COMPLIES WITH
PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO
THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE
MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS
DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE
THAT MAY CAUSE
UNDESIRED OPERATION.
MODEL PA635X
5
14
11
5 5 7 7 7
6 6 6
8
13 9 9 9 12
10
FIGURE 3 – PA635X REAR PANEL - FEATURES AND FUNCTIONS
3. POWER SWITCH When pressed to the IN position, power is applied to the PA635X [provided the rear panel
master AC LINE ON/OFF Switch, item #13, is placed in the ON (I) position]. This is the MANUAL ON position.
When pressed again, it releases to the OUT position (MANUAL OFF), turning the unit OFF.
In addition, this switch must be left in the MANUAL OFF (OUT) position to permit an external DC Control Voltage
to power the PA635X ON and OFF. Refer to "REMOTE MASTER ON/OFF CONTROL" terminals, item #10.
NOTE: The PA635X may also be powered ON/OFF with an external AC line switch into which the power cord of
the PA635X is plugged (such as the switched AC outlet of a preamp, timer, etc. with a 5A minimum rating). For
this type of operation, leave the POWER switch depressed to the MANUAL ON position.
4. Status LED Indicators . These indicators, one for each channel pair, provide the following status information:
•
They show Power ON/OFF and Standby ON/OFF conditions.