MRC88 / MRAUDIO8X8 QUICK START GUIDE
08905142A
29
TEST IR COMMANDS
To test IR Commands, the PC must be connected to either the RS232 COM or
USB COM Port on the MRC88 Front Panel and IR emitters must be connected to
the appropriate IR Emitter Outputs on the MRC88 Rear Panel and correctly
attached to the appropriate devices.
Figure 22 – Select Test Mode
1.
In the
Universal Dragon
™
Tool Bar
, in the
Mode Menu
, select
Test
.
2.
On the virtual keypad, click the
Power Button
. The
MRC88 Front Panel
Zone 1 LED
and
Zone 1 Keypad
should turn ON.
3.
Click the
CD Button
. The
Keypad
should switch to
Source 1
(CD). If a play
command was added to the source select macro, the device should play.
4.
Click all other buttons that have been programmed with IR Commands for the
selected source. Visually confirm function on the device.
5.
Repeat
Steps 3-4
for all
sources
.
6.
Click the
Power Button
. The
MRC88 Front Panel Zone 1 LED
and
Zone 1
Keypad
should turn OFF.
7.
In the
Universal Dragon
™
Tool Bar
, in the
Mode Menu
, select
Normal
.
8.
Reprogram any commands that did not function properly or that were missed
in initial programming.