background image

 

 

 

   

 

Safety Information 

 

 

 

 

 

 

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT 
REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS 
INSIDE. 
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 
 

 

 

The lightning flash with arrowhead symbol within an equilateral triangle 
is intended to alert the user to the presence of uninsulated "dangerous 
voltage" within the product's enclosure that may be of sufficient 
magnitude to constitute a risk of electric shock to persons. 
 

 

 

The exclamation point within an equilateral triangle is intended to alert 
the user to the presence of important operating and maintenance 
(servicing) instruction in the literature accompanying the appliance. 
 

 

 

WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK, 
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. 
 

 

 

 

IMPORTANT SAFETY INFORMATION 

 

 

 

Read Information

 — All the safety and operating information should be read before the appliance is operated. 

Follow Information

 — All operating and use information should be followed. 

Retain Information

 — The safety and operating information should be retained for future reference. 

Heed Warnings

 — All warnings on the appliance and in the operating instructions should be heeded. 

Wall Mounting

 — Mounting of this appliance should be done only by an authorized installer. 

Ventilation

 — The appliances should be situated so that their location or position does not interfere with their proper 

ventilation. These appliances should never be placed near or over a radiator or heat register. These appliances should not 
be placed in a built-in installation such as a bookcase or cabinet that may impede the flow of air through the ventilation 
openings. 

Non-Use Periods

 — Appliances that are left unattended and unused for long periods of time should be de-energized. 

Grounding or Polarization

 — Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug 

has two blades with one blade wider than the other blade. A grounding type plug has two blades and a third grounding 
prong. The polarized wide blade and the third prong are provided for your safety. If the provided plug does not fit your 
outlet, consult an electrician for replacement of the obsolete outlet. 

Power Cord Protection

 — Protect the power cord from being walked on or pinched particularly at plugs, convenience 

receptacles and the point where they exit from the apparatus. 

Water

 — Do not use the apparatus near water. 

Cleaning

 — Unplug the apparatus from the power outlet before cleaning. Use only a dry cloth to clean the apparatus. 

Power Lines

 — An outdoor antenna should be located away from power lines. When installing an outside antenna 

system, extreme care should be taken to avoid touching power lines or circuits, as contact with them may be fatal. 

Object and Liquid Entry

 — Never insert objects of any kind through the openings of these appliances, as they may 

touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Care should be taken so that 
objects do not fall and liquids are not spilled into the appliance through openings in the enclosure. 

Servicing

 — Do not attempt to service these appliances yourself, as opening or removing covers may expose you to 

dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 

 

Summary of Contents for D5SH





















Reviews: