Xantech CWTC10, User Manual

Page: 17 / 28

14
SAVING SETTINGS TO THE PERSISTENT MEMORY
To save settings, go to “Utility” option in Control Panel (Start ->
Settings -> Control Panel -> Utility), and click on “Registry
Manager” tab. Click on “Backup” button. It might take a couple of
seconds to save all the current settings.
RESTARTING THE PANEL
There are two ways to restart the panel: Software and Hardware
Reset. The buttons to restart the panel are located in the back of
device. Software Reset is just like rebooting the system, and does not
reset any settings that might have been set on the device. Hardware
Reset is rebooting the system, as well as resetting all settings on the
panel.
SUSPEND \ USER IDLE MODE
To change this setting, go to “Utility” option in Control Panel (Start -
> Settings -> Control Panel -> Power -> Schemes), and click on the
right Power scheme (Battery or AC) and than set User Idle and
Suspend time. During regular use, to get out of Idle of Suspend state,
simply tap the screen. Registry Manager” tab.