Xantech CWTC10, User Manual

Page: 16 / 28

13
screen area for about 3-5 seconds. After that a window will pop up
and you will need to type a password to get to the Desktop.
Password: admin
Type password, click “Enter”, and “Exit To Desktop”.
CHANGING THE HOMEPAGE
To change a homepage go to “Internet Options” (Start -> Settings ->
Control Panel -> Internet Options). Type the address in the “Start
Page” line, and click OK. Restart the panel, and it will automatically
go to the Kiosk mode with the new homepage set by the user.
CHANGING AN IP ADDRESS
To change an IP address, you need to go to the “Network and Dial-
up Connections” (Start -> Settings -> Control Panel -> Network and
Dial-up Connections). Open up the Network icon, select “Specify an
IP address” and type your new IP address, Subnet Mask, and Default
Gateway. After you are done click OK, and changes would be
applied immediately. By default the CWTC10 is to DHCP mode.
CALIBRATING THE PANEL
To calibrate a panel go to “Stylus” option in Control Panel (Start ->
Settings -> Control Panel -> Stylus), and click on “Calibration” tab.
Click on “Recalibrate” button. Recalibration involves tapping the
center of a target and the panel measures new settings. Recalibration
is needed whenever you touch the screen, but the arrow appears in a
different place.