2
AC1
Fig. 2
Using AC1's in a ZPR68-10 System
The Fig. 2 example works as follows:
• The Zone power amplifier (and other zone dedicated components, if used) is switched ON when a ZPR68-
10 INPUT command turns a zone ON [STATUS terminal goes high (+12V)].
• The Zone power amplifier (and other zone dedicated components, if used) is switched OFF when a
ZPR68-10 OFF command turns a zone OFF [STATUS terminal goes low (0V)].
• The Common Source components are switched ON when the first ZPR68-10 zone is turned ON [CO
terminal goes high (+12V)].
• The Common Source components are switched OFF when the last ZPR68-10 zone is turned OFF [CO
terminal goes low (0V)].
Another excellent application for the AC1 is to switch components that draw more power than is available
from the switched AC outlet on the rear of A/V receivers, preamps, etc. Fig. 3 illustrates such a system:
Fig. 3 Switching Higher Power Units
2-13-01
Rev.C
CONTROL
INPUT
120 VAC 60 HZ
1800 WATTS MAX.
AC1
SWITCHED AC OUTLET
5 to 30 Volts DC
+
–
RESET
15
To 120 V AC
(unswitched)
AC1
SWITCHED
AC Outlet on
Pre-amp, etc.
High Power
Amplifier
786-00
Power
Supply
White Striped
Side
CONTROL
INPUT
120 VAC 60 HZ
1800 WATTS MAX.
AC1
SWITCHED AC OUTLET
5 to 30 Volts DC
+
–
RESET
15
CONTROL
INPUT
120 VAC 60 HZ
1800 WATTS MAX.
AC1
SWITCHED AC OUTLET
5 to 30 Volts DC
+
–
RESET
15
COMMON IR OUTPUTS
COMMON IR INDICATOR
VIDEO
AUDIO
L
R
VIDEO
AUDIO
L
R
ZONE CONTROL - IR INPUTS
1 2 3 4 5 6 7 8
COMMON IR LEVEL
H I
LO
SOURCE INPUTS
ZONE OUTPUTS
1 2 3 4 5 6 7 8
ZONE IR OUTPUTS
1
2
3
4
5
6
7
8
1
2
3
4
5
6
POWER
IR CONFIRM
CO
G
POWER
SUPPLY
ZPR68-10
SIX ZONE EIGHT SOURCE REMOTE PREAMP
+12V
GND
STATUS
INPUT
COM
PORT
ZPR68-10
To 120 V AC
(unswitched)
CD Changer
Laser Disc
COMMON
SOURCES
AC Power
Strip
AC Cords for
"Power Line Switchable"
Common Sources
Cassette DecK
AC1
AC1
ZONE STEREO
POWER AMPLIFIERS
AC Cords for "Power Line Switchable"
Zone Amplifiers and/or Zone Dedicated
Source Components
Repeat this connection system
with additional AC1's for the
remaining zones as desired.
See ZPR68-10 "INSTALLATION
INSTRUCTIONS" for other typical
system connections.
To 120 V AC
(unswitched)