5
4
Controllers
2. Press the
DELETE
button.
The
DELETE
LED will blink continuously.
3. Activate the cordless phone (pick-up a wired phone, if used).
4. Press the key on the phone which has been programmed with the command that you wish to erase.
The command is erased and the
DELETE
LED turns off.
You may now re-program the key.
SHORT COMMANDS
Some commands, such as Channel Up and Channel Down, may skip channels or cause other multiple
actions if memorized at full length. If a button on the original hand-held remote controller requires only a short
tap for its command to be properly executed, and results in multiple actions if the button is pressed too long,
only a short burst of it should be stored in the Fone Link. Step 5, under PROGRAMMING, should be modified
as follows:
5. Press the button on the remote controller that you wish to store and hold it only as long as
you usually press it when controlling the audio/video equipment directly
.
The
PROGRAM
LED on the Fone Link will flash while it is storing the information. When the
information has been stored, the
LEARNING
LED will turn off.
NOTE:
It may be necessary to experiment with the length of time you press the remote controller
button to obtain the desired result.
TEMPLATE AND LABELS
Adhesive backed templates and a sheet of adhesive backed labels are provided with the Fone Link to
remind you of what the telephone keys do as remote control buttons.
• Apply the template as illustrated in Fig. 4.
• Cut out the word and icon labels and stick them in their proper positions on the template
TROUBLESHOOTING
If the Fone Link is used with an old, telephone company supplied, wired telephone set, and you experience
trouble with the keypad, call us. We will send you a cable which will solve the problem.
Template
Label
Fig. 4
FONE LINK
®
is a trademark of XANTECH Corporation.
Copyright 1992 Xantech Corporation.
5-30-00
710-00
