2
172-94
Injector, you must use a Xantech BYPASS94 KIT to route the IR commands around the amplifier(s).
When using more than one Xtra Link for more rooms, be sure the RF splitters you use are DC passing types,
such as Xantech Models 200-00 (2-way) and 202-00 (4-way). Refer to Fig. 4.
INSTALLING THE 291-00 IR RECEIVER:
Insert the cable mini plug attached to the 291-00 into the jack marked "IR RCVR" on the INJ94 Injector. Refer
to Fig. 3.
Plug the 781C-00 Power Supply cord into the jack marked "+12 V" on the INJ94 Injector. Plug the 781C-
00 into a 120 VAC unswitched outlet after you have made all other connections.
Position the 291-00 IR Receiver so that the infrared beam from the handheld remote control has a direct
view to the front of the unit, within 20 feet.
INSTALLING THE INJ94 INJECTOR:
Connect one of the two short coaxial cables between "TV" on the INJ94 Injector and "RF IN" on the TV in
the Remote Room. Connect the room-to-room cable to "INPUT" on the INJ94 Injector.
Fig. 3
Basic Xtra Link Hookup
REMOTE ROOM
MAIN ROOM
RF IN
OUT TO TV
RF IN
OUT TO TV
IN
OUT
OUT
Satellite Dish,
Cable, Etc.
Coaxial Cable
SATELLITE
RECEIVER
(Back Panel)
VCR
(Back Panel)
Coaxial Cable
Coaxial Cable
Room-to-Room Coaxial Cable
RF SPLITTER
2-Way
Coaxial Cable
2ND
TV
RF IN
1ST
TV
RF IN
