__________________________________________ Installation 2-17
To mount the printer on the duplexer
1.
Unpack the duplexer, making sure to remove all the shipping
materials including the polystyrene, tape, plastic bags, and
cardboard. (See the included instructions for unpacking).
Warning:
The printer weighs approximately 33 lbs (15 kg)
without the toner, cassette, and media installed. Have
someone help you lift it.
2.
Move the printer to the side to make room for the duplexer.
Caution:
Always use the hollowed hand grip areas when picking
up the duplexer (fig. 2.11). Never move it with the
printer attached.
3.
Hold the duplexer by the hand grip areas and place it where the
printer had been.
Fig. 2.11 Pick up the Duplexer
